Chromebook slicer

Prepare a model to print

Your model never leaves this device. Load an STL, choose a few settings, then export printer G-code.

Choose a printer to see its build plate

Drop an STL here

or choose a file from your Chromebook

Maximum file size: 64 MB

Start with your printer Choose the printer model printed on the front of your machine.

Your first print

Guided Project

Prepare the test cube (or your own model) for a supervised test print. Each step ticks itself when the lab sees it done.

To finish the lab: complete all 9 project steps and get 4 of 5 on the skills check.

Print setup

Basic settings

AMS · 0.4 mm hardened steel

1 Machine Printer in your lab

Check the model name printed on the machine. The wrong profile can damage a print or the printer.

2 Material

PLABest for class PETGMore durable

Filament feeds from the AMS. Bambu Studio will match this material to a loaded slot.

3 Size & quality

Model scale

Uniform scaling keeps the model proportions unchanged.

Layer height

Infill

Adaptive cubic infill: fine cells under the surface, larger ones deep inside, so the print stays strong on less filament.

4 Helpers Tree supportsGrow supports only from the build plate SkirtPrime the nozzle with loops around the model BrimImprove first-layer grip for narrow parts

Prepare a model to print

Drop an STL here

Guided Project

Join the 3D print queue?

Skills check